Hi Ben, Do you get success in disabling i2c2. I have same problem, could u guide me to overcome this issue
Thanks On Tuesday, May 10, 2016 at 9:21:30 PM UTC+5:30, [email protected] wrote: > > Hi all, > > I've been working with both of the CAN bus interfaces on the BBB, which > meant disabling I2C2 to get the pins back. Under Wheezy this was fairly > straightforward, following the instructions here: > > http://www.embedded-things.com/bbb/enable-canbus-on-the-beaglebone-black/ > > I can't find a Jessie equivalent anywhere and the way these things work > seems pretty different now. Can anybody help please? > > Cheers, > > Ben. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7c9d648f-c95a-4f20-aa30-8071843d89eb%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
