Hi Robert, Thanks for your quick response. I tried the link you posted for the new image but I got a permission error.
Thanks, David > On Aug 1, 2016, at 4:46 PM, Robert Nelson <[email protected]> wrote: > > On Mon, Aug 1, 2016 at 2:57 PM, <[email protected]> wrote: >> I just updated two Beaglebone Green Wireless modules with the latest >> operating system (Debian 8.4 2016-05-13 4GB SD LXQT) and I find that the MAC >> addresses of the wlan0 interfaces of both boards show as DE:AD:BE:EF:00:00. >> Is there a way to automatically set them to the numbers printed on the >> boards? I'm pretty sure they didn't show as DE:AD:BE:EF:00:00 before I did >> the upgrade because I was able to setup an ssh connection to each board >> independently. Now, since they both have the same MAC address, they both get >> the same IP address from my router and get confused. What is the best way to >> sort this out? > > Yes, > > But it requires 2 software packages not installed in that version. > > 1: bb-wl18xx-firmware, which you can install via : ( sudo apt-get > update ; sudo apt-get install bb-wl18xx-firmware ) > > 2: a tool from TI, that i haven't packaged yet... > > https://github.com/rcn-ee/ti-18xx-ti-utils/commits/R8.6_SP1-bbgw > > Or use this new image: > > http://rcn-ee.net/rootfs/bb.org/testing/2016-08-01/lxqt-4gb/bone-debian-8.5-lxqt-4gb-armhf-2016-08-01-4gb.img.xz > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9D57B3C7-D6D7-4E5D-9CC0-D6EDE8D0D68E%40gmail.com. For more options, visit https://groups.google.com/d/optout.
