does /media/rootfs/boot/uEnv.txt contain:
uname_r=${kernel_version}
?
For that matter you never mention if you have a first stage uEnv.xt file (
/uEnv.txt ). Granted this assumes redoing form a blank rootfs. But if this
is not a blank rootfs then your step #3 should not be necessry.
On Tue, Aug 9, 2016 at 9:31 PM, Raulp <[email protected]> wrote:
> I did get the minicom logs but it shows only uboot# prompt.
>
> What I did was this :
> 1-->modified one dtb and ran rebuild.sh
>
> 2-->Copy Kernel Image
> Kernel Image:
> ~/
> sudo cp -v ./bb-kernel/deploy/${kernel_version}.zImage
> /media/rootfs/boot/vmlinuz-${kernel_version}
> 3--->Copy Kernel Device Tree Binaries
> ~/
> sudo mkdir -p /media/rootfs/boot/dtbs/${kernel_version}/
> sudo tar xfv ./bb-kernel/deploy/${kernel_version}-dtbs.tar.gz -C
> /media/rootfs/boot/dtbs/${kernel_version}/
> -4-->Copy Kernel Modules
> ~/
> sudo tar xfv ./bb-kernel/deploy/${kernel_version}-modules.tar.gz -C
> /media/rootfs/
>
> Did I miss something?
> Last resort would be to format and prepare the card again .!!
>
> On Tuesday, August 9, 2016 at 7:29:55 PM UTC+5:30, RobertCNelson wrote:
>>
>> On Tue, Aug 9, 2016 at 8:53 AM, Jane <[email protected]> wrote:
>> > I did copy the modules and the device trees along with the uimage.
>> > System doesnt boots ups !
>> > No logs on Minicom as well.!
>>
>> No serial logs on Minicom?
>>
>> 50/50, it's a minicom configuration issue, try again with gtkterm..
>>
>> If it doesn't work with gtkterm, then it's likely you didn't install
>> the bootloader properly (try again). (or you are using
>> VirtualBox/VMware/etc, which the directions say doesn't work and is
>> un-supported)
>>
>> Regards,
>>
>> --
>> Robert Nelson
>> https://rcn-ee.com/
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/beagleboard/54606420-e696-45eb-975a-c870a54a7b39%40googlegroups.com
> <https://groups.google.com/d/msgid/beagleboard/54606420-e696-45eb-975a-c870a54a7b39%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
>
> For more options, visit https://groups.google.com/d/optout.
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CALHSORqfRsDkEF75mCF5T0QZ5JUbytWTDsUA33Ht9cLPh1m6Ng%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
