On Wed, Aug 10, 2016 at 10:02 PM, Stephane Charette <[email protected]> wrote: > Trying to install BBGW-blank-debian-8.5-seeed-iot-armhf-2016-08-07-4gb.img > onto a new BBGW. Had problems, so I went out and bought a new micro SD card > and a new card reader just in case. > > When I hold the boot button down as I plug in power, I get one of two > scenarios happening: > > User LEDs #0 and 2 turn on, then lights 1 and 3 turn on, and back to #0 and > 2, then 1 and 3. I've left it like that for over an hour thinking maybe > that was a new pattern.
That's wifidog, scanning for wifi adapers... > All 4 LEDs turn on, then off, then on again, at the same rate as the normal > "heartbeat". So blink twice, then 1/2 second pause, and blink twice again. "flashing" failed... > User LED #0 (heartbeat) blinks maybe 3 or 4 times, then nothing else. No > other activity. > > > Is there a page where the blink patterns are explained? If not, does > someone know where in the code to look so I can find the different blink > patterns and their explanation? Do you have a usb serial adapter? For "flashing" you are looking for the cylon pattern.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjQVAUmsQ2OvFeBy36S0cj605yx2j2JR8OkbeU-Mk_n2A%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
