Hey all, I have a BBB(Beagle Bone Black) and here is what I did:
First I flashed this firmware onto my board: BBB-eMMC-flasher-debian-7.4-2014-04-23-2gb. Next I connected my BBB to my WIN10 Laptop via USB then I was able to connect successfully to my BBB using Putty (over 192.168.7.2). And everything went well. However as I wanted to download some packeges such as x11vnc and I do not have a direct free LAN network I wanted to use my win10 Laptop as LAN bridge. (My Win10 PC get WLAN from the university and shares it via a LAN to my BBB). Well So I just connected my BBB via USB and via LAN to my Laptop. However when I bridged the LAN my VNC server suddenly stopped. That is why I pluged the USB cable of the BBB of and restarted it and I tried to connect my Laptop via SSH over Putty with my BBB again. But that was not possible: *I am now not able to connect via SSH to my BBB anymore.* However it is showing me in my PC the board(when connecting via USB). But even opening Start.htm does not work (the first two steps remain orange - I cannot connect via a Browser to 192.168.7.2 - the website is not loading at all) I also tried to flash different images onto my BBB. - I was never not able to connect via SSH. I also tried to connect with another PC to my BBB - this however worked fine. But I need my Laptop to connect with the BBB I hope you can help me! Many thanks in advance! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c587c088-5b91-41aa-98a4-6dac8f522ea4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
