Hi Alex, We never able to solve the issue using TI,s method, since the support from TI was really pathetic on this issue.
In fact we used a different method to solve the issue. Since i have changed my company recently i am not updated on the recent progress of the same. But i am sure they found a different method which is far more easier than this. Regards Jitheesh Surendran On Tue, Aug 16, 2016 at 9:38 PM, Alex Ferm <[email protected]> wrote: > Did you ever find a solution to this issue? I ran into the same error > today. > > On Monday, May 9, 2016 at 6:08:14 AM UTC-5, Jitheesh T wrote: >> >> I have been trying to program the eMMC on beaglebone black using uniflash >> through ethernet interface. I have gathered all the files based on the >> below URL, >> >> >> >> http://processors.wiki.ti.com/index.php/Sitara_Linux_Program >> _the_eMMC_on_Beaglebone_Black >> >> >> >> But I am not able to flash the board. Please find the error that i am >> getting below, >> >> >> >> " U-Boot SPL 2014.07-00107-gd28f2b9 <Feb 18 2016 - 20:31:36> ### ERROR >> ### Please RESET the board ### " >> >> >> >> This is the first step i have done and i have been using >> ti-sdk-am335x-evm-08.00.00.00. Then somebody in the ti e2e forum suggested >> me to use the latest SDK from repository. I have tried that >> also(ti-processor-sdk-linux-am335x-evm-02.00.01.07). With this i am >> getting a new error. Please find the error below, >> >> >> >> " U-Boot SPL 2015.07-00080-gfa53e9d-dirty <Feb 22 2016 - 17:00:39> SPL: >> Unsupported Boot Device! ### ERROR ### Please RESET the board ### " >> >> >> >> Can somebody please provide any help on this issue as we are stuck at >> this. >> >> >> Note:We are tried with flasher image with ethernet support. To support >> boot from ethernet we removed R67 and Mounted R92 on the beaglebone black >> board. >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit https://groups.google.com/d/ > topic/beagleboard/SCZqb6vDEz0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/555d4955-ee53-46d8-84e9-80164bca5157%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/555d4955-ee53-46d8-84e9-80164bca5157%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAPX1Kwp7NS6C%2BFH-gNTAVWJ3iwkKtTcbw2_B3Gqtyz8HR70bMw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
