I've observed this 3 or 4 times always while I hear thunder and storms are in the area. My BBW is on a UPS and none of the crashes seem to correlate with UPS "beeps" or room light abnormalities, although I have good correlation between lighting on the security camera video and the last hearbeat from the BBW.
The reset button will not start it. I have to remove the 5V power barrel connector wait ~20-30 seconds and re-plug, then it boots. My RPi2, also part of my IOT project, and on the same UPS, has never glitched. I plan on wiring up a DPDT relay with the power to the BBW delivered through NC contacts and when the RPi2 detects the BBW IOT "heartbeat" has stopped to energize the relay for 30 seconds to cycle the power. On Thursday, August 18, 2016 at 10:29:08 AM UTC-5, Wulf Man wrote: > > try a different power supply. the PMIC is picky cant be too fast or too > slow of a ramp up. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8b976432-81dc-47ee-92d7-fc412a67f8f5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
