to test what you want use a device overlay first. then you can adapt the overlay to be loaded at boot time
On 8/30/2016 7:24 AM, 'El Smiedro' via BeagleBoard wrote: > > Hello everyone, > > currently I am using a BBB with debian 3.8.13 and I would like to > change the dtb file to get some GPIO-pins with pulldown by default. I > searched many sites, but I think many information are not up to date > (read something about the device tree is not used anymore?!). Is > somewhere a good and current documentation/tutorial for this topic? > Thank you very much for your help. > > Best regards > eric > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/2f1505e9-2308-46e2-b00d-d46e58345ecd%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/2f1505e9-2308-46e2-b00d-d46e58345ecd%40googlegroups.com?utm_medium=email&utm_source=footer>. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9744e71d-8a8d-f2e1-8e20-4080cf24ecc1%40gmail.com. For more options, visit https://groups.google.com/d/optout.
