After the "Uncompressing Linux... done, booting the kernel" message there is no output to serial console anymore. Looks like the board is stuck completely since all four LEDs (D2 to D5) are lit up. There is no output to dmesg or kern.log even when I enable CONFIG_DEBUG_LL, CONFIG_EARLYPRINTK and so on.
I am basically using the same uEnv.txt as I do for succsefully booting the 3.8.13 (without preempt_rt patch) kernel that I buit with some modifications to .config file. So I don't think that I have a problem with wrong tty console parameter, for example. Could the problem be that I am using the kernel from this repo: https://github.com/beagleboard/kernel/tree/3.8-rt Can anyone suggest a more recently tested version with preempt_rt, for example something from RobertCNelson repo: https://github.com/beagleboard/linux/tree/3.8 I am not generally limited to 3.8.13, just started with that one. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9fc939c1-db53-416e-85b9-50d1b8ff2d87%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
