Hi all, I am interested in using Linaro's QEMU to simulate BeagleBoard (or xm). The image available online is pretty old so I am interested in updating the kernel.
I followed Robert's wiki <https://eewiki.net/display/linuxonarm/BeagleBoard>to produce a bootable image and gave it to qemu-system-arm like this <https://wiki.linaro.org/Resources/HowTo/Qemu-beagleboard>. It apparently loaded and ran MLO but hang there "SPL: failed to boot from all boot devices" I understood what I did was perhaps naive. I wonder if any of the experts here have any clue. I suspect it may have something to do with how Linaro QEMU implemented the booting process differently from the real hardware. Any thoughts would be much appreciated! Lin -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d70cf7f4-1286-494a-a5dd-abd1216a7724%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
