Hello All,
i have customized board based on Beale-Bone Black. i am trying to disable
waking up the System from UART0.
*echo disabled >
/sys/devices/ocp.2/44e09000.serial/tty/ttyO0/power/wakeup *
* echo disabled > /sys/devices/ocp.2/44e09000.serial/power/wakeup *
this is the setting of the currnt wakeup sources:
*cat /sys/kernel/debug/wakeup_sources*
--------------------------------------------------
*name ................wakeup.gpiokey
................44e3e00.rtc ................alarmtimer
................*
As you see there is no UART to see!! but i am still able to wake the system
up from UART ??
root@milo:~# *echo mem > /sys/power/state*
[ 5309.439410] PM: Syncing filesystems ... done.
[ 5309.448122] Freezing user space processes ... (elapsed 0.004 seconds)
done.
[ 5309.460957] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[ 5309.470180] Suspending console(s) (use no_console_suspend to debug)
[ 5309.531079] PM: suspend of devices complete after 53.350 msecs
[ 5309.532112] PM: late suspend of devices complete after 1.017 msecs
[ 5309.533249] PM: noirq suspend of devices complete after 1.119 msecs
[ 5309.533326] PM: Successfully put all powerdomains to target state
[ 5309.533326] PM: Wakeup source UART
[ 5309.547912] PM: noirq resume of devices complete after 14.450 msecs
[ 5309.548769] PM: early resume of devices complete after 0.708 msecs
[ 5309.549692] c_can_platform 481d0000.d_can can0: setting BTR=2a01
BRPE=0000
[ 5309.549843] net eth0: initializing cpsw version 1.12 (0)
[ 5309.552140] net eth0: phy found : id is : 0x7c0f1
[ 5309.552202] libphy: PHY 4a101000.mdio:01 not found
[ 5309.552209] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 5309.774800] PM: resume of devices complete after 226.004 msecs
[ 5309.853396] Restarting tasks ... [ 5309.857207] usb 2-1: USB disconnect,
device number 9
*As you see in line 10, the system is still waking up from UART0 !!!any
idea what is going wrong???*
Thanks
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/d230d138-63a4-48bb-90de-2b4eddad2dff%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
