pcDuino4 Nano

The pcDuino4 Nano is an Allwinner H3 based ARM board. It is only two thirds 
the size of the Raspberry Pi. It is open source. It works with Ubuntu MATE, 
Debian and etc. The pcDuino4 Nano uses the Allwinner H3 Soc. It integrates 
Ethernet, IR receiver, video/audio output and supports HDMI and AVOUT. It 
can be powered via the MicroUSB port In such a small board it still 
integrates rich interfaces and ports. Besides the popular HDMI, Ethernet, 
USB-Host, USB-OTG, DVP camera interface and AVOUT (audio and video) it has 
an onboard Microphone, IR receiver, a serial debug port and a Raspberry Pi 
compatible 40 pin GPIO pin header.


   - SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM 
   Mali-400MP2 GPU up to 600 MHz
   - System Memory – 1GB DDR3 SDRAM
   - Storage – micro SD card slot
   - Video & Audio Output – HDMI and 3.5mm jack for CVBS (composite + 
   stereo audio)
   - Connectivity -10/100M Ethernet
   - USB – 3x USB 2.0 host ports, 1x micro USB OTG port
   - Camera – DVP Interface
   - Expansions – 40-pin Raspberry Pi compatible header with UART, SPI, 
   I2C, PWM, GPIOs, etc…
   - Debugging – 4-pin header for serial console
   - Misc – Power and reset buttons; 2x LEDs; IR receiver; on-board 
   - Power Supply – 5V/2A via micro USB port; 4.7V ~ 5.6V via VDD pin on 
   “Raspberry Pi” header.
   - Dimensions – 64 x 50mm (Orange Pi One dimensions: 69mm × 48mm)

For more options, visit http://beagleboard.org/discuss
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
For more options, visit https://groups.google.com/d/optout.

Reply via email to