. . .
TFTP from server 0.0.0.0; our IP address is 184.108.40.206; sending
through gateway 220.127.116.11
Load address: 0x82000000
Loading: * *TFTP error: 'File not found' (1)
On Mon, Sep 19, 2016 at 6:35 PM, Robert Nelson <robertcnel...@gmail.com>
> On Mon, Sep 19, 2016 at 8:17 PM, Dave Lynch <dhlyn...@gmail.com> wrote:
> > I have attached a log file of the boot from eMMC, flash process, shutdown
> > and then reboot.
> > It looks to me like the flash process worked fine.
> > I am not sure what is happening after the flash, it looks like there is a
> > boot and then shutdown.
> > After the powerdown I pull the SDcard and try to reboot.
> > That is where the BBB fails to find linux on eMMC
> > I can not see anything obviously wrong, but I am not sure what I am
> > for.
> > I am a reasonably competent embedded linux developer, but new to BBB,
> > The board rev is an A6.
> Can you please double check with this flasher:
> I'm pretty sure i'm going to have to re-generate the 2016-09-09 image
> (bootloader issues)..
> Robert Nelson
> For more options, visit http://beagleboard.org/discuss
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> For more options, visit https://groups.google.com/d/optout.
For more options, visit http://beagleboard.org/discuss
You received this message because you are subscribed to the Google Groups
To unsubscribe from this group and stop receiving emails from it, send an email
To view this discussion on the web visit
For more options, visit https://groups.google.com/d/optout.