On Sat, Oct 1, 2016 at 9:42 PM, Stephane Charette <[email protected]> wrote: > Trying to test the latest RCN image from 2016-09-28. But I get a kernel > panic before the flashing begins. Serial debug console shows these errors: > > Begin: Running /scripts/local-premount ... done. > Begin: Will now check root file system ... fsck from util-linux 2.25.2 > fsck: error 2 (No such file or directory) while executing fsck.ext4 for > /dev/mmcblk1p1 > fsck exited with status code 8 > done. > Warning: File system check failed but did not detect errors > [ 9.628045] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data > mode. Opts: (null) > done. > Target filesystem doesn't have requested > /opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh. > Begin: Running /scripts/local-bottom ... done. > Begin: Running /scripts/init-bottom ... done. > switch_root: can't execute '/bin/sh': No such file or directory > [ 9.758682] Kernel panic - not syncing: Attempted to kill init! > exitcode=0x00000100 > ...insert kernel dump here... > > At this point everything hangs. Anyone else seeing the same thing? Build > used is this one: > https://rcn-ee.com/rootfs/bb.org/testing/2016-09-28/seeed-iot/BBGW-blank-debian-8.6-seeed-iot-armhf-2016-09-28-4gb.img.xz
Just double checked ^... seems to be working correctly... [ 3.483814] remoteproc0: powering up wkup_m3 [ 3.488330] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148 [ 3.495902] remoteproc0: remote processor wkup_m3 is now up [ 3.501611] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192 [ 3.514132] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,GW1A,BBGW16055517' ----------------------------- Starting eMMC Flasher from microSD media Version: [1.20160909: u-boot 1MB -> 4MB hole...] ----------------------------- Checking for Valid bbgw-eeprom header Valid bbgw-eeprom header found [335] ----------------------------- copying: [/dev/mmcblk0] -> [/dev/mmcblk1] lsblk: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk1boot0 179:16 0 2M 1 disk mmcblk1boot1 179:24 0 2M 1 disk mmcblk0 179:0 0 7.4G 0 disk `-mmcblk0p1 179:1 0 3.3G 0 part / mmcblk1 179:8 0 3.7G 0 disk `-mmcblk1p1 179:9 0 3.7G 0 part ----------------------------- df -h | grep rootfs: df: cannot read table of mounted file systems: No such file or directory ----------------------------- Erasing: /dev/mmcblk1 108+0 records in 108+0 records out 113246208 bytes (113 MB) copied, 9.48847 s, 11.9 MB/s [ 28.416409] random: nonblocking pool is initialized 108+0 records in 108+0 records out 113246208 bytes (113 MB) copied, 2.88258 s, 39.3 MB/s Erasing: /dev/mmcblk1 complete ----------------------------- Writing bootloader to [/dev/mmcblk1] dd if=/opt/backup/uboot/MLO of=/dev/mmcblk1 count=1 seek=1 conv=notrunc bs=128k ----------------------------- 0+1 records in 0+1 records out 69124 bytes (69 kB) copied, 0.0170685 s, 4.0 MB/s ----------------------------- dd if=/opt/backup/uboot/u-boot.img of=/dev/mmcblk1 count=2 seek=1 conv=notrunc bs=384k ----------------------------- 0+1 records in 0+1 records out 375108 bytes (375 kB) copied, 0.0588013 s, 6.4 MB/s ----------------------------- Formatting: /dev/mmcblk1 sfdisk: [sfdisk from util-linux 2.25.2] sfdisk: [sfdisk --force --Linux --in-order --unit M /dev/mmcblk1] sfdisk: [4,,L,*] sfdisk: Checking that no-one is using thi[ 30.433117] mmcblk1: p1 s disk right now ... sfdisk: OK Disk /dev/mmcblk1: 119296 cylinders, 4 heads, 16 sectors/track sfdisk: /dev/mmcblk1: unrecognized partition table type Old situation: sfdisk: No partitions found New situation: Units: 1MiB = 1024*1024 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End MiB #blocks Id System /dev/mmcblk1p1 * 4 3727 3724 3813376 83 Linux /dev/mmcblk1p2 0 - 0 0 0 Empty /dev/mmcblk1p3 0 - 0 0 0 Empty /dev/mmcblk1p4 0 - 0 0 0 Empty Successfully wrote the new partition table Re-reading the partition table ... sfdisk: If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).) mkfs.ext4 -c -O ^metadata_csum,^64bit /dev/mmcblk1p1 -L rootfs ----------------------------- mke2fs 1.43 (17-May-2016) ext2fs_check_if_mount: Can't check if filesystem is mounted due to missing mtab file while determining whether /dev/mmcblk1p1 is mounted. Discarding device blocks: done Creating filesystem with 953344 4k blocks and 238560 inodes Filesystem UUID: e70fe1ee-d0b6-4302-b91b-df0b2b55248d Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYh8bMP6RUxHK3Y1_m74FCYSi0K8Ts_ENkHDB-hFyUyDEA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
