I would guess win 32 is for windows .  Your beaglebone black is a linux 
machine.  I had troubles writing a boot disk for linux on a windows machine. 


      From: William Hermans <[email protected]>
 To: [email protected] 
 Sent: Saturday, October 1, 2016 4:01 PM
 Subject: Re: [beagleboard] BBB Flashing new image
   
Try reading this: 
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC

Suitable images are also listed on that page.

On Sat, Oct 1, 2016 at 3:56 PM, William Hermans <[email protected]> wrote:

Not all images blink the LEDs. It's not that common, but I've run into at least 
one such image in the last year or so.

On Sat, Oct 1, 2016 at 3:28 PM, Paul P <[email protected]> wrote:

Hello, 
I'm trying flash kali linux or debian onto BBB with zero success for some 
reasons.  
I did downloaded image and write into memory card using Win32DiskImg without 
any issues (32gb 10class card) 
Put card into slot and press and hold user button. 
Connect power supply and apparently LED should start blinking but this is not 
happening. 
Released button after couple seconds and no lights apart one indication power 
to board. 
1-2 hours or even 24h dosen't change anything - still after removing card and 
booting nothing was flashed. 
Anyone experience this same issues? 
Thanks, 
Paul 
 -- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscribe@google groups.com.
To view this discussion on the web visit https://groups.google.com/d/ms 
gid/beagleboard/5187e79d-cb8e- 4ade-844d-1eb98a28b777%40googl egroups.com.
For more options, visit https://groups.google.com/d/op tout.




-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CALHSORp7EFEcmqjzpYce5Qc_MWtQnUAaXPNzPT0fMfhqD5m0Bw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


   

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/151602463.3775518.1475542562647%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to