Hello Everyone, I am having an issue with my BeagleBone Black when I move the OS from the SD card to the eMMC on board. Here are the steps I use and results, please let me know if you see the problem.
1. Download the latest image from beagleboard.org 1a. Flash it to an SD card 2. Use the "power/user" button to boot the SD card via power adapter. (however, it also boots from the SD card as long as it's just in there) 3. Connect the USB Cable, windows creates the 192.168.7.1 interface and I can SSH to 192.168.7.2 and everything works fine. 4. Reboot to check it, works fine again 5. Uncomment the flashing line in side of the /boot/uEnv.txt cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh 6. Reboot, watch the lights flash while it is flashing eMMC 7. Remove the SD card 8. Boot the beaglebone 9. Windows doesn't even make a sound like it normally does when attaching a USB device and the BeagleBone Black is not available. If I reflash and go back, it starts working again as long as I boot from the SD card. As a secondary note, here is my df -h output. I am not sure if it is booting correctly now the eMMC and because the SD card is in, it is working properly. root@beaglebone:~# df -h Filesystem Size Used Avail Use% Mounted on udev 10M 0 10M 0% /dev tmpfs 99M 8.4M 91M 9% /run /dev/mmcblk0p1 3.3G 3.0G 35M 99% / tmpfs 247M 4.0K 247M 1% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 247M 0 247M 0% /sys/fs/cgroup tmpfs 50M 0 50M 0% /run/user/1000 root@beaglebone:~# Any thoughts or debugging steps would be greatly appreciated. Cheers, Gregg -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/bc947fd6-455b-4e5f-9868-aa82820719ef%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
