Colin, Did you get resolution to this? I've been trying for a couple of days to get an example python script to work. When it first runs I see the entire message transmitted while transmit enable is high. Subsequent attempts show transmit enable going low after the first byte is written.
Thanks, Jay On Friday, December 11, 2015 at 6:03:10 AM UTC-5, Colin Whittaker wrote: > > Hi Robert, > > Can you elaborate on your statement: > > "CONFIG_SERIAL_OMAP" is on it's way out being replaced by > "CONFIG_SERIAL_8250_OMAP".. > > > Is there active development to have the 8250 emulation support all the > OAMP serial port features ? > > I am trying to get RS485 to work with the serial cape, and the 8250_omap > driver does not support the RS485 ioctl. The old omap-serial does. > Do you know if anyone is working on this ? > > Thanks, > > Colin.. > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d80fb1ea-e01f-4923-b75f-1fc5ac5bec2d%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
