On Monday, November 7, 2016 at 3:29:07 PM UTC+2, Charles Steinkuehler wrote: > > You have to set the pins to the proper pinmux values for UART and PWM, > not just load the overlay. > > How do you suggest i should enable all the pins needed? If i try to enable BB-PWM0,1,2 overlays pwm still doesn't work from Adafruit_BBIO library...
> > > You are running a non-standard distribution. The universal overlays > are part of the BBB kernels, but the config-pin utility is probably > not getting installed. Just grab it from github: > > https://github.com/cdsteinkuehler/beaglebone-universal-io > > ...or you can directly play with the sysfs entries created by the overlay. > > I will try this also... I hope i will eventually find out how. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e04ec81f-cfd9-4de9-b5e1-1f40e95ecc37%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
