Hello everybody.
Just got my BBG and I'm not able to connect to the internal server via eth.
PC is laptop with Win10, on BBG is power LED shining and USR LEDs are
blinking. BBG is directly connect to laptom via eth cable. This laptom is
older one (HP ProBook4530s) after complete reinstal.
In network setting I assigned static adres in IPv4 protocol
(192.168.7.254/255.255.255.0) and the result is still the same:
Pinging 192.168.7.2 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.7.2:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss)
LEDs on both eth connector are "dead" so there is no communication but in
device manager there is Linux USB Ethernet/RNDIS Gadget and in properties
it says that device is working properly.
I've also tried to instal new FTDI drivers, eject BBG, turn off firewall
but without any succes.
Thank you for any suggestion
BR
Petr
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/7c6e74a9-f7fb-4e84-a6cb-aa15aaedf2f3%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
