hi, i am currently using BBB-Red board which as industrial grid.. with Debian GNU/Linux 7.8 (wheezy) os and made to boot from SDcard and image date is BeagleBoard.org Debian Image 2015-03-01.
lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 7.8 (wheezy) Release: 7.8 Codename: wheezy i try to power up this bbb with my own carrier card with external power supply, it is (carrier card with external power supply) absolutely working with BBB-balck board and having same OS. if i connect this board to BBB-red board and powered on but eth0 doesn't came up, but in BBB-black board its working fine.. i tried with dmesg and i found below mesg... dmesg | grep eth0 [ 5.623106] net eth0: initializing cpsw version 1.12 (0) [ 5.628425] net eth0: phy found : id is : 0x7c0f1 [ 5.633516] net eth0: phy 4a101000.mdio:03 not found on slave 1 [ 5.665388] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready so there is no ethernet connection up. The carrier card with external power supply have 4 RS485 with serial digital isolator Si8422.. plz can any one tell what was the issues... even i thought of loading issues but its not.. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/81ec0484-9ddd-4836-874a-bdcfa574768f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
