Hi, It would appear I have the same issue - except mine is a BB Black (hope I'm not hijacking this thread - it's not my intention). I also have my BBB powered by a 5V 2AMP PSU (as I have always done). Like you, my BBB starts with a multi-flash LED pattern for around 30 seconds then kick is into the cylon / 1 2 3 4 3 2 1 2 3 4 3 2... eMMC Flash sequence... But after around 2 to 2 1/2 minutes the LEDs stop the sequence with all 4 ON and... nothing, nada...
Thinking, initially, that the flash was finished, I removed power, ejected the uSD card and reBooted... that's when I first noted the nothing-ness... EXCEPT... upon power up UsrLED0 then Usr LED1 power ON and stay ON... that's it... So then I tried the ready to go Flasher image below... same... After the power on LED pre-amble, I see the cylon / 1 2 3 4 3 2 1 2 3 eMMC Flash sequence for 2 to 2 1/2 minutes and stop... I don't have any debugging connected (never have with the BBB, but come from the Atmel / embedded processor world so, I could if I knew what to do) , but I could do if it would help and I could be pointed to a link explaining what / how to do it... More than willing. I'm currently worried I may have bricked my BBB :-( Oh yeah, BeagleBone Black. Rev C using a 4GB uSD card, micro USB connection to one of two different Macs and / or a 5V 2A PSU connection... Hope someone can shed some light on this one for me ? Regards, Ian. > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ee0f389f-4674-413d-8da5-abca5abc254e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
