from the PMIC data sheet Absolute Maximum Ratings Supply voltage (with respect to PGND) AC -0.3 20
Recommended Operating Conditions Supply voltage, AC 4.3 5.8 V They call the power input AC but its really DC only You can use that power supply. But the recommended power supply is a good quality 5v 2 amp supply Disclaimer. I do not recommend you use it but the PMIC data sheet says its just fine. On 11/29/2016 12:20 PM, Robert Nelson wrote: > On Tue, Nov 29, 2016 at 12:27 PM, <[email protected]> wrote: >> Hi, >> >> i got a "switching adapter" with 5.2 Volt, 1A Output. It says nothing about >> Watt so i am not sure about this. >> Is this safe to use without damaging the Board? The plug fits in. >> >> Picture and details: https://imgur.com/a/Slsrk > Nope, 5V is not 5.2V... > > Regards, > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9eef06c6-6170-996a-96df-583f473a4e9d%40gmail.com. For more options, visit https://groups.google.com/d/optout.
