I want to use for PWM generation to control servo motor. The problem i m facing is :
To enable libpruio i m using this dts file https://github.com/jadonk/cape-firmware/blob/master/arch/arm/boot/dts/BB-BONE-PRU-01-00A0.dts To enable the pwm pin i m using cape-universaln https://github.com/cdsteinkuehler/beaglebone-universal-io/blob/master/cape-universaln-00A0.dts These both files are kind of conflicting with each other as if one is loaded to slots then other is not loading. If i do not load the cape-universaln i m not able to export the pwm pins. Any help appreciated. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/fb5cb9a4-147f-46a3-af42-2d1ecb077eca%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
