On Wednesday, December 7, 2016 at 10:57:00 PM UTC+8, RobertCNelson wrote: > On Wed, Dec 7, 2016 at 8:49 AM, <[email protected]> wrote: > > Hi, > > > > I built the kernel "4.8.12-bone2" using Mr Nelson's source and scripts and > > downloaded it to the Sdcard together with the file system > > "debian-8.6-bare-armhf-2016-09-17", following the instructions on > > "https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-Bootloader:U-Boot";. > > When the system booted it got stuck at "A start job is running for > > dev-mmcb...\xc2\xa0.device", and after the timeout the system seemed to go > > in a loop and cannot finish booting. Could someone please tell me what this > > message means and what I might have done wrong? > > Probably the wrong mmc name in /etc/fstab > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/
I copied the fstab line from the instruction webpage, the device was /dev/mmcblk0p1. Is this the correct device? If not what should I put there? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/425c09d8-827d-4b86-a1e5-ab705e951637%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
