Hello -- Brand new BBB Wireless, factory image.
Two situations I am puzzling over, perhaps folks might help with solutions. 1. Net over USB - Following typical steps for hooking up new board, cannot get connected past host laptop over USB. Shared connxn and obtain auto IP for Linux gadget on Win7, check. Shell in and add default gateway *.*.7.1 to route traffic through host, check. Echo nameservers into resolv.conf, check. Ping the host machine, check. Ping 8.8.8.8 - FAIL. Ping Google - FAIL (unknown host). Hmmm, and I just went through these steps on a Wheezy board few weeks ago no problems. Any suggestions on what I might be missing? 2. ConnMan - Which is new to me, previous experience being with wicd. Get into connmanctl, then enable wifi, and receive following --"Error wifi: Method "SetProperty" with signature "sv" on interface "net.connman.Technology" doesn't exist" Read some man pages, nothing jumps out at me, power down the board. Plug in a UWN200 (Ralink) wifi dongle, powerup the board. Get into connmanctl, enable, scan, services, agent on, connect, quit...no problem. Unplug the dongle, power up, and no joy. At the prompt, I expected typing in technologies would show me something (below), but, I am kinda stumped. Its the error above I could not find good sources for resolution. Any assistance will be appreciated. ##Trying to connect via onboard 1835 connmanctl> technologies /net/connman/technology/ethernet Name = Wired Type = ethernet Powered = True Connected = False Tethering = False ##When connected via USB dongle UWN200 connmanctl> technologies /net/connman/technology/wifi Name = WiFi Type = wifi Powered = True Connected = True Tethering = False TetheringIdentifier = BeagleBone-06A5 TetheringPassphrase = BeagleBone /net/connman/technology/ethernet Name = Wired Type = ethernet Powered = True Connected = False Tethering = False Thank you -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0e5b6f0f-9663-4d1d-89a0-36e37afef8d3%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
