TJF, so what is the best way to update the dtc? I've used this in the past:
https://github.com/RobertCNelson/bb.org-overlays More specifically the script: dtc-overlay.sh However, I'm not sure this is the appropriate method in this case. If not, what is? An apt-get install ...? Greg On Wednesday, December 14, 2016 at 11:40:03 AM UTC-5, TJF wrote: > > Hi Damon! > > Kernel 3.8.13-bone79 is uio_pruss only (no remoteproc). > > Am Mittwoch, 14. Dezember 2016 04:37:47 UTC+1 schrieb Damon Kelly: >> >> -bash: /sbin/reboot: Input/output error >> > > You executed the reboot command and the binary /sbin/reboot couldn't > access some hardware (perhaps a CPU ball). Obviously the device tree mixes > up some configurations. > > First, try to re-compile your device tree source. There were changes in > the device tree compiler around that version, so use the dtc version of > the new kernel! If this doesn't help, then post your source here. > > Regards > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0e5b164b-7cfe-4693-a39e-ac79232da228%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
