Is this a case I should RMA it? Or should I just solder it down? Thanks,
Gregg On Friday, December 16, 2016 at 2:43:52 PM UTC-8, RobertCNelson wrote: > > On Fri, Dec 16, 2016 at 4:39 PM, Gregg Harrington > <[email protected] <javascript:>> wrote: > > I just tried to power my BBBWL through the barrel connector and wasn't > able > > to get it to power, when I looked at the bottom of the board, the > connector > > isn't soldered to the pad. When I short the pad to the pin, it boots up > and > > starts drawing power. Is this expected, did I get a weird board. > > Ah! Now it makes sense why the eeprom never got programmed!!! > > I bet your board was in the wrong pile at the factory... > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/6ba5eb4e-acfa-482a-88a8-68fecc5c63b4%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
