On the console do: lsmod You should see something like:
can_raw 7618 3 can 31379 1 can_raw mcp2515 8341 0 mcp251x 12797 0 c_can_platform 7581 0 c_can 12220 1 c_can_platform can_dev 14358 3 c_can,mcp2515,mcp251x If mcp251x is there the driver is loaded. You can do an ifconfig -a to show if active too. To bring up the interface you can check here: http://elinux.org/Bringing_CAN_interface_up Travis On Tuesday, November 29, 2016 at 6:20:59 AM UTC-5, [email protected] wrote: > > Hi, > > I am trying to get an MCP2515 running on SPI1.0. I can successfully load > the .dtbo, found the device under /sys/bus/spi/devices/spi1.0, but > couldn't seem to get the CAN bus running. Does anyone know if the driver is > already compiled into the kernel? Or if I need to do something to activate > it? > > Thanks for the help! > > Regards, > > Ricky Chang > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/1cfc39b1-cd26-414f-b674-e4b18dfa68f1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
