Hi Robert, Thanks, that makes sense. Will reflash with the iot image.
Thanks, Jeremy On Friday, 23 December 2016 01:25:33 UTC+10, RobertCNelson wrote: > > On Thu, Dec 22, 2016 at 7:58 AM, Jeremy Herbert <[email protected] > <javascript:>> wrote: > > Just as an update, unloading the g_ether and loading g_serial results in > a > > working serial port at /dev/ttyGS0. Of course, the usb ethernet doesn't > work > > after this, and the modules can't be loaded at the same time. > > You can see the logic here: > > > https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh#L389-L424 > > > g_multi requires a file option, and the console image lack's a 2nd > partition, img file etc... So it defaults to g_ether. > > Moving to configfs usb will fix this but i'm just starting to figure > configfs out.. > > > https://github.com/RobertCNelson/boot-scripts/blob/master/boot/omap3_beagle.sh#L44-L86 > > > So till then, grab the "iot" image.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ed387e0e-37cc-4591-af9b-1e60cb8e2bb0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
