Hi All,
I am trying to enable the I2C1 on beaglebone black board. I have written
overlay to enable the i2c1, please verify below snippet and correct me if
anything wrong in that.
i2c2: i2c@4819c000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins>;
status = "okay";
clock-frequency = <100000>;
nintend : nintend@<slaveaddr> {
compatible = "nunchuk";
reg = <slave addr>;
};
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
0x158 0x72
0x15c 0x72
>;
};
I am trying to add this snippet to am335x-customboneblack.dts.
Thanks & regards,
Madhu
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/8ee5fab8-43c7-4d5c-97f2-b04b920ebb3d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
