On Friday, 30 December 2016 10:45:35 UTC, truni wrote: > Hi all > > > I cannot enable UARTS no matter what I try. > > > See attached for the commands I am sending, has anybody come across this > problem before? > > > My distro information : > > > Linux beaglebone 4.4.30-ti-r64 #1 SMP Fri Nov 4 21:23:33 UTC 2016 armv7l > GNU/Linux > > > I just cannot get this to work, no does editing uEnv.txt... > > > Please help :) > > > Thanks!
So I got the bone to boot up by editing the /etc/rc.local file, which is the last script to run upon boot. However, for some reason although I add both UART-3 and UART-5, the bone only boots with UART-5 enabled. It will boot with only UART-3 enabled if I echo that line out after the UART-5 is echoed. So I am a step closer but not there yet Has anybody got a solution as I cannot enable two UART's at the same time.. it's either one or the other... Is there some pinmux issue going on? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4429f6e2-ceb0-4440-a7e6-556fbd204075%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
