On Thu, Jan 12, 2017 at 9:19 PM, Kevin Gordon <gordonkevin...@gmail.com> wrote: > The steps taken were as follows (same as on > http://www.rescuerobot.org/drupal/?q=content/beaglebone-black-wireless). > Made an SD Card from bone-debian-8.6-lxqt-4gb-armhf-2017-01-10-4gb.img.xz. > Booted BBBW from card. > From a Windows 10 PC using TeraTERM connected on 192.168.8.1 > Changed timezone. > Completed Wireless configuration using connmanctl: > root@beaglebone:~# connmanctl > Error getting VPN connections: The name net.connman.vpn was not provided by > any connmanctl> scan wifi > Scan completed for wifi > connmanctl> services > KGNETGEAR wifi_506583d635bb_4b474e455447454152_managed_psk > JandJ wifi_506583d635bb_4a616e644a_managed_psk > connmanctl> agent on > Agent registered > connmanctl> connect wifi_506583d635bb_4b474e455447454152_managed_psk > Agent RequestInput wifi_506583d635bb_4b474e455447454152_managed_psk > Passphrase = [ Type=psk, Requirement=mandatory, Alternates=[ WPS ] ] > WPS = [ Type=wpspin, Requirement=alternate ] > Passphrase? xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx > Connected wifi_506583d635bb_4b474e455447454152_managed_psk > connmanctl> quit > root@beaglebone:~# ifconfig wlan0 > wlan0 Link encap:Ethernet HWaddr 50:65:83:d6:35:bb > inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0 > inet6 addr: fe80::5265:83ff:fed6:35bb/64 Scope:Link > UP BROADCAST RUNNING MULTICAST DYNAMIC MTU:1500 Metric:1 > RX packets:62 errors:0 dropped:0 overruns:0 frame:0 > TX packets:75 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:10341 (10.0 KiB) TX bytes:16478 (16.0 KiB) > > root@beaglebone:~# apt-get update > root@beaglebone:~# apt-get install leafpad > root@beaglebone:~# apt-get install build-essential git-core > device-tree-compiler > root@beaglebone:~# apt-get install gdbserver > > Edited the /boot/uEnv.txt file. > Removed the "#" from "dtb=am335x-boneblack-emmc-overlay.dtb"
Yeah, i don't have things ready for the BBBW for people to do that "today"... (i need to make an overlay for the wl1835, and users will have to use the new U-Boot overlays to make it work) > New line added: "cape_enable=bone_capemgr.enable_partno=BB-UART1,BB-I2C1" > > Rebooted the BBBW. > > ran ifconfig -a > No wlan0 or SoftAp0. Replaced by eth0. > > If I try to shutdown the BBBW immediately reboots. This is one of side affects of having eth0, when there really isn't one.. > Is there a possible repair or should I make a new SD Card? Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYio-LFVH7sP7-c9X2%3D1%3DinLG0hjfmOYqAswsSzKJNC82w%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.