No uimage in /boot /. Check the sd card once On Sat, 4 Feb 2017 at 1:29 PM, Madhu K <[email protected]> wrote:
> Hi All, > > I am trying to boot the beaglebone black from sd card, but boot process > stops with below error. > > I have taken u-boot and rootfs from the below link > > wget http://s3.armhf.com/dist/bone/bone-uboot.tar.xzuE > > wget > http://s3.armhf.com/dist/bone/ubuntu-trusty-14.04-rootfs-3.14.4.1-bone-armhf.com.tar.xz > > I have attached the uEnv.txt file,pleas everify. > > > U-Boot SPL 2013.04-dirty (Jul 10 2013 - 14:02:53) > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, > SoftConn) > musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Peripheral mode controller at 47401000 using PIO, IRQ 0 > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, > SoftConn) > musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Host mode controller at 47401800 using PIO, IRQ 0 > OMAP SD/MMC: 0 > mmc_send_cmd : timeout: No status update > reading u-boot.img > reading u-boot.img > > > U-Boot 2013.04-dirty (Jul 10 2013 - 14:02:53) > > I2C: ready > DRAM: 512 MiB > WARNING: Caches not enabled > NAND: No NAND device found!!! > 0 MiB > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > *** Warning - readenv() failed, using default environment > > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, > SoftConn) > musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Peripheral mode controller at 47401000 using PIO, IRQ 0 > musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, > SoftConn) > musb-hdrc: MHDRC RTL version 2.0 > musb-hdrc: setup fifo_mode 4 > musb-hdrc: 28/31 max ep, 16384/16384 memory > USB Host mode controller at 47401800 using PIO, IRQ 0 > Net: <ethaddr> not set. Validating first E-fuse MAC > cpsw, usb_ether > Hit any key to stop autoboot: 0 > gpio: pin 53 (gpio 53) value is 1 > mmc0 is current device > micro SD card found > mmc0 is current device > gpio: pin 54 (gpio 54) value is 1 > SD/MMC found on device 0 > reading uEnv.txt > 557 bytes read in 4 ms (135.7 KiB/s) > Loaded environment from uEnv.txt > Importing environment from mmc ... > Running uenvcmd ... > syntax error > mmc_send_cmd : timeout: No status update > 24808 bytes read in 35 ms (691.4 KiB/s) > Bad Linux ARM zImage magic! > gpio: pin 55 (gpio 55) value is 1 > ** File not found /boot/uImage ** > U-Boot# > > what could be the possible mistakes for this error, please help me to > resolve this issue. > > Thanks and regards, > Madhu > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/367b44a5-26d5-4f30-8563-7f1a92d9bbbe%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/367b44a5-26d5-4f30-8563-7f1a92d9bbbe%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CA%2B-ZLitN1_CjO-3diY%3DJNe_dknzraV_YosyyufKMRn6m_a_Rcg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
