Hi Robert,
after having compile the image 4.9.6-bone4 I still cannot ssh to
192.168.1.1 so I have tried to switch back to 4.1.21-bone-rt-r20 by
modifying the uEnv.txt and reboot then I get:
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
** Invalid partition 2 **
** Invalid partition 3 **
** Invalid partition 4 **
** Invalid partition 5 **
** Invalid partition 6 **
** Invalid partition 7 **
## Error: "bootcmd_nand0" not defined
link up on port 0, speed 100, full duplex
BOOTP broadcast 1
DHCP client bound to address 172.23.16.115 (99 ms)
Using cpsw device
TFTP from server 172.23.20.17; our IP address is 172.23.16.115; sending
through gateway 172.23.16.254
Filename '\smsboot\x64\wdsnbp.com'.
Load address: 0x82000000
Loading: * ###
2.7 MiB/s
done
Bytes transferred = 30832 (7870 hex)
missing environment variable: pxeuuid
Retrieving file: pxelinux.cfg/01-78-a5-04-cc-37-c1
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.23.20.17; our IP address is 172.23.16.115; sending
through gateway 172.23.16.254
Filename 'pxelinux.cfg/01-78-a5-04-cc-37-c1'.
Load address: 0x80100000
Loading: *
TFTP error: 'Access violation.' (4)
Starting again
Retrieving file: pxelinux.cfg/AC171073
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.23.20.17; our IP address is 172.23.16.115; sending
through gateway 172.23.16.254
Filename 'pxelinux.cfg/AC171073'.
Load address: 0x80100000
Loading: *
TFTP error: 'Access violation.' (4)
Starting again
Retrieving file: pxelinux.cfg/AC1710
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.23.20.17; our IP address is 172.23.16.115; sending
through gateway 172.23.16.254
Filename 'pxelinux.cfg/AC1710'.
Load address: 0x80100000
Loading: *
TFTP error: 'Access violation.
Is there a way to solve this ?
Le mercredi 21 décembre 2016 21:34:06 UTC+1, RobertCNelson a écrit :
>
> On Wed, Dec 21, 2016 at 2:32 PM, Beninio Mbila <[email protected]
> <javascript:>> wrote:
> > Hi Robert,
> >
> > Thanks I will try this update, can I still use your update script for
> this?
>
> As Shown:
>
> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Kernel_Options
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
Le mercredi 21 décembre 2016 21:34:06 UTC+1, RobertCNelson a écrit :
>
> On Wed, Dec 21, 2016 at 2:32 PM, Beninio Mbila <[email protected]
> <javascript:>> wrote:
> > Hi Robert,
> >
> > Thanks I will try this update, can I still use your update script for
> this?
>
> As Shown:
>
> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Kernel_Options
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
Le mercredi 21 décembre 2016 21:34:06 UTC+1, RobertCNelson a écrit :
>
> On Wed, Dec 21, 2016 at 2:32 PM, Beninio Mbila <[email protected]
> <javascript:>> wrote:
> > Hi Robert,
> >
> > Thanks I will try this update, can I still use your update script for
> this?
>
> As Shown:
>
> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Kernel_Options
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/89484cda-f8f9-43d6-971a-8a7f3e935727%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
