On Mon, Feb 13, 2017 at 1:02 PM, ags <[email protected]> wrote: > I downloaded a new image onto an SD card and booted my BBB. I then edited > the /boot/uEnv.txt file to remove the comment from the last line to enable > flashing to the eMMC upon reboot. It worked as expected. > > Now I have an SD card with an image that I could use again as a backup boot > device - but I need to re-comment the flasher line. If I boot from the SD > card it will flash again (correct?). How can I get access to the > /boot/uEnv.txt file on the SD card? Can I mount it somehow after booting > from the eMMC? I tried to mount the SD card on a Mac to edit the file, but > only the FAT partition was accessible.
Just plug it in after it boots off the eMMC.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgXJqzO%2Bvc-E%3DVo6o7rEvDJGzD%2BO9-8OUMcm93jBAhPCA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
