On Wed, Feb 15, 2017 at 1:00 PM, TJF <[email protected]> wrote:
> Use Debian OS, version 3.8 is most reliable. > > Why additional hardware (TI-CC2531)? When your temperature is in the range > of -50 to 125 °C you can use Dallas sensors. Connect a bunch of them > directly to a GPIO line of the BBB (a 4k7 pull-up is all you have to add). > > Regards. > I concur. I'm using a DS18B20 here, and I'm having a hard time seeing how it could have been easier to setup, and read from. You know, from an embedded project perspective. I did not have to add a pullup, ut I'm also only using one sensor. Maybe multiple on the same data channel needs this ? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORo9jLQ8297n-fbhAqo6HYOTB5RVPQv8EiLdoxEtmA8JKQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
