2017-02-23 7:55 GMT+01:00 John Syne <[email protected]>: > > Well, at some point they are always connected. What you want is for them > to connect only at one point and that point should be closest to the power > source. Think of a star connection, with the center of the star as the > reference ground point. What you don’t what is digital signals flowing > through the analog ground and that occurs when you connect AGND to DGND at > more than one point. >
So when I understand this correctly: in layout of a board they should be connected with each other as close as possible to the BBB/BBG expansion header connector? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHptrU4FnKZHP%3D%3DYbpjtddF1jmfRNOvWgPGUyw_MG2JntpJGFA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
