There is no such letter available for this development board as such and there won't be.
It cannot be bricked and can always be re-flashed if the eMMC is affected. If you turn off the power the eMMC is still there but the SDRAM is not preserved. If you load bad code it can modify the eMMC to the point that the board will not boot. Internal ROM can be used to fix this event by using the internal boot loader to reflashed the board. Any user data that may be stored is a result of the SW that may be run on the board and the HW does not prevent any data form being stored. This board runs dozens of versions of Linux and dozens of Linux distros. As such, this board is not a finished product and is not offered as such. Gerald On Fri, Mar 3, 2017 at 9:53 PM, Justus Timm <justus.t...@q4services.com> wrote: > Hello, > > > > I was wondering if there happened to already be a statement of volatility > for the BeagleBone Black product? > > > > Would it be possible to obtain a copy of this statement/letter? > > > > Please advise if this is something that can be obtained. > > > > Thank you for your time! > > > > *Justus Timm* > Test Engineer > > Q4 Services LLC > 1410 North Goldenrod Road > > Orlando, Florida 32807 > Office: +1 407 382 4000 <(407)%20382-4000> > www.q4services.com > > > [image: http://www.q4services.com/images/email.png] > > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/BN6PR08MB2753BA2DD35CEF34066B7ADFD32A0%40BN6PR08MB2753. > namprd08.prod.outlook.com > <https://groups.google.com/d/msgid/beagleboard/BN6PR08MB2753BA2DD35CEF34066B7ADFD32A0%40BN6PR08MB2753.namprd08.prod.outlook.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > -- Gerald ger...@beagleboard.org http://beagleboard.org/ gcol...@emprodesign.com -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHK_S%2Be28KufXUX6bS2YuNruph0DjxPRKFFWnZAerwZBMtf8yQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.