Hi All,
I am trying to read a second I2C bus but it gives "controller timed out"
message.
below is the log for same.
[root /]# i2cdetect -y -r 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: [ 1188.831062] omap_i2c 4802a000.i2c: controller timed out
-- [ 1189.831029] omap_i2c 4802a000.i2c: controller timed out
-- [ 1190.851032] omap_i2c 4802a000.i2c: controller timed out
...
...
70: [ 1299.991028] omap_i2c 4802a000.i2c: controller timed out
-- [ 1301.011026] omap_i2c 4802a000.i2c: controller timed out
-- [ 1302.031024] omap_i2c 4802a000.i2c: controller timed out
-- [ 1303.051030] omap_i2c 4802a000.i2c: controller timed out
-- [ 1304.071025] omap_i2c 4802a000.i2c: controller timed out
-- [ 1305.091028] omap_i2c 4802a000.i2c: controller timed out
-- [ 1306.111024] omap_i2c 4802a000.i2c: controller timed out
-- [ 1307.131027] omap_i2c 4802a000.i2c: controller timed out
Below are the changes I have done in .dts an .dtsi files.
changes made in am335x-bone-common.dtsi:
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP |
MUX_MODE2) /* spi0_d1.i2c1_sda */
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP |
MUX_MODE2) /* spi0_cs0.i2c1_scl */
>;
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
status = "okay";
clock-frequency = <100000>;
};
changes made in am335x-boneblack.dts:
&i2c1 {
nunchuk: nunchuck@52 {
compatible = "nunchuk";
reg = <0x52>;
};
};
apart from these changes, should I change anything else in bootloader
files? or anything else to be added to the device tree files?
please help me out to solve this issue.
Regards,
Madhu
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/1b57c83c-e733-471e-be8a-f619fef574aa%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
