Hi all, I am the lead electrical engineer for a small company based in New York State. We have been using both the Beaglebone Green and Beaglebone Black internally for hardware development purposes for the past couple of months for an upcoming product. We are early in the process of transitioning to a production-grade single board hardware design for said product.
I am looking for CAD files for the Beaglebone Black Rev C to use as a starting point in the board design process. Can anyone here point me towards for provide me with Altium Designer files for the BeagleBone Black Rev C? We do not use Cadence Allegro to design our boards, and have no way of converting the available OrCAD/Allegro CAD files to an Altium Designer compatible format. I would much rather not have to redesign a complicated & nontrivial board layout for an open-source hardware product such as this, especially given that the open-source nature of BeagleBone was the most motivating factor in choosing it as a development and prototyping tool. Note that we are not modifying any part of the BeagleBone Black's design (except removing the 2X23 female headers and HDMI hardware). We are using it as a base and adding additional functionality via peripheral components that are integrated on the same board. Thank you for any help that you can provide. I look forward to hearing back, James *Disclaimer: I fully understand that these files would come as is, with no warranty or guarantee of suitability or merchantability for any purpose. **There is a separate thread for BeagleBone Green related responses. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/dafaab18-eefb-4cc1-a1d0-56dd311f4929%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
