Thanks Graham, got it working. I think it was the cable length that was causing problem. At the moment I'm just trying to figure out why the magnetometer data are not varying while i can see the changes for the accelerometer and gyroscope.
On Sun, Mar 12, 2017 at 2:31 AM, Graham <[email protected]> wrote: > That all looks fine. > > Any I2C chip, that is properly connected to P9-19 and 20 should show up on > bus 2. > > What are the DC Voltages on P9-19 and P9-20? > > --- Graham > > == > > > > On Saturday, March 11, 2017 at 6:00:00 PM UTC-6, christ christ wrote: >> >> >> ---------- Forwarded message ---------- >> From: christ christ <[email protected]> >> Date: Sat, Mar 11, 2017 at 3:37 PM >> Subject: Re: Detecting (probing) MPU-9250 connected to beaglebone board >> black >> To: Graham <[email protected]> >> Cc: BeagleBoard <[email protected]> >> >> >> Hi Graham, >> I just thought that a visual of what I'm doing would help with your >> assistance. Please let me know if there is anything i'm missing here. >> Debian result0.jpg >> <https://drive.google.com/file/d/0ByBuIRtnBqaKWnRUYS1nUEJaQ2s/view?usp=drive_web> >> >> Debian result1.jpg >> <https://drive.google.com/file/d/0ByBuIRtnBqaKajVHWEhJWjRDNnM/view?usp=drive_web> >> >> Debian result2.jpg >> <https://drive.google.com/file/d/0ByBuIRtnBqaKR1doYUxZMmtMTG8/view?usp=drive_web> >> >> Debian result3.jpg >> <https://drive.google.com/file/d/0ByBuIRtnBqaKX0J5QTVTY0U2X0U/view?usp=drive_web> >> >> Debian result4.jpg >> <https://drive.google.com/file/d/0ByBuIRtnBqaKYW9FOTc1QUtHYVU/view?usp=drive_web> >> >> Debian result5.jpg >> <https://drive.google.com/file/d/0ByBuIRtnBqaKRUJpUjVJU2xiXzg/view?usp=drive_web> >> >> Debian result6.jpg >> <https://drive.google.com/file/d/0ByBuIRtnBqaKNGw3QnNyU1ZRMmc/view?usp=drive_web> >> >> Debian result7.jpg >> <https://drive.google.com/file/d/0ByBuIRtnBqaKQW1rZGpWQy1yQkU/view?usp=drive_web> >> >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAPTvsHj3v0UsNAA3S0Qowp_d0%3DmZ6JERRw2h6RgCv%3DgxXL7zGQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
