Hi all,
I am trying to make a video capture application with OpenCV and QT in Beaglebone Black RevC(with Debian Jessie image). When I attempt to run the application in Beaglebone black, the following errors are shown. *CMEM Error: init: Failed to open /dev/cmem: 'No such file or directory'TIOCL FATAL: The cmemk kernel module is not installed. Consult the OpenCL UserGuide at http://software-dl.ti.com/mctools/esd/docs/opencl/index.html*As per the link* https://www.mail-archive.com/[email protected]/msg42027.html, *I tried to solve the issue. But the problem is not solved. Also the following links shows the TI AM335x doesn't have a GPU in it. So it cannot support OpenCL. *1) https://groups.google.com/forum/#!topic/beagleboard/pZpc5egCaUw.2) https://e2e.ti.com/support/embedded/linux/f/354/t/500780*But is openCL necessary for videostreaming applications ? Whether openCV is sufficient for that? Is there any video streaming applications which does not use openCL. What I understood is openCL is only for parallel processing? Whether it is necessary to use Beaglebone X15(in which openCL is supported) to run a video streaming applications? Thanks for the advice in advance. Thanks and Regards, Sajeevan.K -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/fa35f66c-066d-4cb2-b66f-bc2a6e6e5c32%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
