Hello,
I am currently using a Beaglebone Black with these distribution :
*Distributor ID: DebianDescription: Debian GNU/Linux 8.7
(jessie)Release: 8.7Codename: jessie*I tried to modify a dtbo file in
/lib/firmware in order to disable all the buttons on the LCD7 cape.
Modification did not change anything so I decided to clean the whole folder
to see if it changes anything. And surprise ! My LCD is booting up
perfectly and everything is working.
Here is my dmesg with nothing in /lib/firmware :
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.43-ti-r84 (root@a3-imx6q-wandboard-2gb)
(gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Fri Jan 20 16:28:53 UTC 2017
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone Black
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c105d300, node_mem_map
df961000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon )
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df920000 s24320 r8192 d20736
u53248
[ 0.000000] pcpu-alloc: s24320 r8192 d20736 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129408
[ 0.000000] Kernel command line: console=ttyO0,115200n8
bone_capemgr.enable_partno=BB-UART1,BB-UART2,BB-UART4
root=UUID=c70fe398-9a84-4888-8fba-0ca17bd1421a ro rootfstype=ext4 rootwait
coherent_pool=1M net.ifnames=0 quiet cape_universal=enable
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 445068K/522240K available (11370K kernel code, 917K
rwdata, 3796K rodata, 744K init, 907K bss, 28020K reserved, 49152K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0ed7aa0 (15167 kB)
.init : 0xc0ed8000 - 0xc0f92000 ( 744 kB)
.data : 0xc0f92000 - 0xc10775d0 ( 918 kB)
.bss : 0xc107a000 - 0xc115cfa8 ( 908 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000015] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
89478484971ns
[ 0.000037] clocksource: timer1: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000049] OMAP clocksource: timer1 at 24000000 Hz
[ 0.001015] clocksource_probe: no matching clocksources found
[ 0.001228] Console: colour dummy device 80x30
[ 0.001258] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.001266] This ensures that you still see kernel messages. Please
[ 0.001272] update your kernel commandline.
[ 0.001293] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ 0.046822] pid_max: default: 32768 minimum: 301
[ 0.046969] Security Framework initialized
[ 0.046983] Yama: becoming mindful.
[ 0.047020] AppArmor: AppArmor disabled by boot time parameter
[ 0.047193] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.047206] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.048069] Initializing cgroup subsys io
[ 0.048101] Initializing cgroup subsys memory
[ 0.048147] Initializing cgroup subsys devices
[ 0.048166] Initializing cgroup subsys freezer
[ 0.048182] Initializing cgroup subsys net_cls
[ 0.048198] Initializing cgroup subsys perf_event
[ 0.048213] Initializing cgroup subsys net_prio
[ 0.048238] Initializing cgroup subsys pids
[ 0.048296] CPU: Testing write buffer coherency: ok
[ 0.048357] ftrace: allocating 34645 entries in 102 pages
[ 0.146400] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.146522] Setting up static identity map for 0x80008280 - 0x800082e0
[ 0.150658] Brought up 1 CPUs
[ 0.150683] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ 0.150692] CPU: All CPU(s) started in SVC mode.
[ 0.152425] devtmpfs: initialized
[ 0.170041] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 3
[ 0.190075] omap_hwmod: debugss: _wait_target_disable failed
[ 0.231284] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.235401] xor: measuring software checksum speed
[ 0.274821] arm4regs : 1219.000 MB/sec
[ 0.314815] 8regs : 1091.000 MB/sec
[ 0.354816] 32regs : 1089.000 MB/sec
[ 0.394815] neon : 1730.000 MB/sec
[ 0.394823] xor: using function: neon (1730.000 MB/sec)
[ 0.394862] pinctrl core: initialized pinctrl subsystem
[ 0.396875] NET: Registered protocol family 16
[ 0.400608] DMA: preallocated 1024 KiB pool for atomic coherent
allocations
[ 0.401827] cpuidle: using governor ladder
[ 0.401850] cpuidle: using governor menu
[ 0.407680] OMAP GPIO hardware version 0.1
[ 0.419582] No ATAGs?
[ 0.419616] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.420178] omap4_sram_init:Unable to allocate sram needed to handle
errata I688
[ 0.420193] omap4_sram_init:Unable to get sram pool needed to handle
errata I688
[ 0.499062] raid6: int32x1 gen() 230 MB/s
[ 0.566886] raid6: int32x1 xor() 176 MB/s
[ 0.634983] raid6: int32x2 gen() 304 MB/s
[ 0.702836] raid6: int32x2 xor() 199 MB/s
[ 0.770948] raid6: int32x4 gen() 284 MB/s
[ 0.838936] raid6: int32x4 xor() 199 MB/s
[ 0.906940] raid6: int32x8 gen() 282 MB/s
[ 0.974933] raid6: int32x8 xor() 186 MB/s
[ 1.042838] raid6: neonx1 gen() 1458 MB/s
[ 1.110824] raid6: neonx1 xor() 846 MB/s
[ 1.178824] raid6: neonx2 gen() 1885 MB/s
[ 1.246820] raid6: neonx2 xor() 1173 MB/s
[ 1.314816] raid6: neonx4 gen() 1928 MB/s
[ 1.382839] raid6: neonx4 xor() 1206 MB/s
[ 1.450846] raid6: neonx8 gen() 1188 MB/s
[ 1.518850] raid6: neonx8 xor() 845 MB/s
[ 1.518857] raid6: using algorithm neonx4 gen() 1928 MB/s
[ 1.518864] raid6: .... xor() 1206 MB/s, rmw enabled
[ 1.518871] raid6: using intx1 recovery algorithm
[ 1.528223] edma 49000000.edma: TI EDMA DMA engine driver
[ 1.532856] SCSI subsystem initialized
[ 1.533305] libata version 3.00 loaded.
[ 1.533643] usbcore: registered new interface driver usbfs
[ 1.533717] usbcore: registered new interface driver hub
[ 1.533830] usbcore: registered new device driver usb
[ 1.534433] omap_i2c 44e0b000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring
probe
[ 1.534487] omap_i2c 4819c000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring
probe
[ 1.534608] media: Linux media interface: v0.10
[ 1.534669] Linux video capture interface: v2.00
[ 1.534775] pps_core: LinuxPPS API ver. 1 registered
[ 1.534784] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 1.534903] PTP clock support registered
[ 1.535817] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 1.537243] NetLabel: Initializing
[ 1.537259] NetLabel: domain hash size = 128
[ 1.537265] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.537330] NetLabel: unlabeled traffic allowed by default
[ 1.537779] clocksource: Switched to clocksource timer1
[ 1.650010] NET: Registered protocol family 2
[ 1.650867] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 1.650923] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.650983] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.651062] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.651083] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.651418] NET: Registered protocol family 1
[ 1.652038] RPC: Registered named UNIX socket transport module.
[ 1.652056] RPC: Registered udp transport module.
[ 1.652062] RPC: Registered tcp transport module.
[ 1.652069] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.652731] Unpacking initramfs...
[ 2.010484] Freeing initrd memory: 4820K (cfb4b000 - d0000000)
[ 2.011184] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
counters available
[ 2.014088] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 2.014225] audit: initializing netlink subsys (disabled)
[ 2.014315] audit: type=2000 audit(1.948:1): initialized
[ 2.024699] zbud: loaded
[ 2.025441] VFS: Disk quotas dquot_6.6.0
[ 2.025721] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 2.028547] NFS: Registering the id_resolver key type
[ 2.028621] Key type id_resolver registered
[ 2.028630] Key type id_legacy registered
[ 2.028662] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.029048] fuse init (API version 7.23)
[ 2.029689] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 2.038512] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 2.038780] io scheduler noop registered
[ 2.038801] io scheduler deadline registered
[ 2.038881] io scheduler cfq registered (default)
[ 2.040254] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
568
[ 2.042282] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 2.043636] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 2.047034] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
[ 2.060377] console [ttyS0] enabled
[ 2.062133] [drm] Initialized drm 1.1.0 20060810
[ 2.113834] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 2.113860] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 2.114247] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ 2.121532] libphy: 4a101000.mdio: probed
[ 2.121567] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00,
driver SMSC LAN8710/LAN8720
[ 2.122507] cpsw 4a100000.ethernet: Detected MACID = 68:9e:19:6f:2e:12
[ 2.122664] cpsw 4a100000.ethernet: cpts: overflow check period 2125
[ 2.124396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.124460] ehci-platform: EHCI generic platform driver
[ 2.124654] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.125073] usbcore: registered new interface driver usb-storage
[ 2.127436] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 2.130214] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine,
bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.130235] musb-hdrc: MHDRC RTL version 2.0
[ 2.130243] musb-hdrc: setup fifo_mode 4
[ 2.130263] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.131924] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 2.134495] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine,
bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.134515] musb-hdrc: MHDRC RTL version 2.0
[ 2.134523] musb-hdrc: setup fifo_mode 4
[ 2.134539] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.134706] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 2.134754] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned
bus number 1
[ 2.135059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.135074] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.135083] usb usb1: Product: MUSB HDRC host driver
[ 2.135092] usb usb1: Manufacturer: Linux 4.4.43-ti-r84 musb-hcd
[ 2.135101] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 2.136034] hub 1-0:1.0: USB hub found
[ 2.136104] hub 1-0:1.0: 1 port detected
[ 2.146195] mousedev: PS/2 mouse device common for all mice
[ 2.148238] omap_rtc 44e3e000.rtc: already running
[ 2.148701] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as
rtc0
[ 2.149523] i2c /dev entries driver
[ 2.151375] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60
sec
[ 2.151822] cpuidle: enable-method property 'ti,am3352' found operations
[ 2.152546] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 2.215445] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.216179] usbcore: registered new interface driver usbhid
[ 2.216192] usbhid: USB HID core driver
[ 2.216557] ashmem: initialized
[ 2.217472] remoteproc0: wkup_m3 is available
[ 2.217489] remoteproc0: Note: remoteproc is still under development
and considered experimental.
[ 2.217497] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and
backward compatibility isn't yet guaranteed.
[ 2.224396] NET: Registered protocol family 10
[ 2.226404] mip6: Mobile IPv6
[ 2.226438] NET: Registered protocol family 17
[ 2.226600] Key type dns_resolver registered
[ 2.226713] mpls_gso: MPLS GSO support
[ 2.227112] omap_voltage_late_init: Voltage driver support not added
[ 2.238558] PM: Cannot get wkup_m3_ipc handle
[ 2.243132] ThumbEE CPU extension supported.
[ 2.243168] Registering SWP/SWPB emulation handler
[ 2.244172] registered taskstats version 1
[ 2.244361] zswap: loaded using pool lzo/zbud
[ 2.248275] Btrfs loaded
[ 2.272401] mmc1: MAN_BKOPS_EN bit is not set
[ 2.272718] Key type encrypted registered
[ 2.276121] input: tps65217_pwr_but as
/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 2.278344] mmc1: new high speed MMC card at address 0001
[ 2.279322] mmcblk1: mmc1:0001 MMC04G 3.66 GiB
[ 2.279786] mmcblk1boot0: mmc1:0001 MMC04G partition 1 1.00 MiB
[ 2.280223] mmcblk1boot1: mmc1:0001 MMC04G partition 2 1.00 MiB
[ 2.283245] mmcblk1: p1
[ 2.299586] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 2.300179] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.300438] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 2.302358] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.302789] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.303204] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.303585] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 2.303628] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 2.304866] remoteproc0: powering up wkup_m3
[ 2.304938] remoteproc0: Booting fw image am335x-pm-firmware.elf, size
217148
[ 2.305193] remoteproc0: remote processor wkup_m3 is now up
[ 2.305218] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version =
0x192
[ 2.310935] bone_capemgr bone_capemgr: Baseboard:
'A335BNLT,00C0,4815BBBK1C57'
[ 2.310970] bone_capemgr bone_capemgr:
compatible-baseboard=ti,beaglebone-black - #slots=4
[ 2.349810] bone_capemgr bone_capemgr: slot #0: '4D 7.0 LCD CAPE-
4DCAPE-70T ,00A3,4D SYSTEMS ,BB-BONE-LCD7-01'
[ 2.397784] bone_capemgr bone_capemgr: slot #1: No cape found
[ 2.441782] bone_capemgr bone_capemgr: slot #2: No cape found
[ 2.485782] bone_capemgr bone_capemgr: slot #3: No cape found
[ 2.491600] bone_capemgr bone_capemgr: enabled_partno PARTNO 'BB-UART1'
VER 'N/A' PR '0'
[ 2.491613] bone_capemgr bone_capemgr: slot #4: override
[ 2.496971] bone_capemgr bone_capemgr: Using override eeprom data at
slot 4
[ 2.496987] bone_capemgr bone_capemgr: slot #4: 'Override Board
Name,00A0,Override Manuf,BB-UART1'
[ 2.506094] bone_capemgr bone_capemgr: enabled_partno PARTNO 'BB-UART2'
VER 'N/A' PR '0'
[ 2.506107] bone_capemgr bone_capemgr: slot #5: override
[ 2.511461] bone_capemgr bone_capemgr: Using override eeprom data at
slot 5
[ 2.511476] bone_capemgr bone_capemgr: slot #5: 'Override Board
Name,00A0,Override Manuf,BB-UART2'
[ 2.520564] bone_capemgr bone_capemgr: enabled_partno PARTNO 'BB-UART4'
VER 'N/A' PR '0'
[ 2.520576] bone_capemgr bone_capemgr: slot #6: override
[ 2.525940] bone_capemgr bone_capemgr: Using override eeprom data at
slot 6
[ 2.525955] bone_capemgr bone_capemgr: slot #6: 'Override Board
Name,00A0,Override Manuf,BB-UART4'
[ 2.534997] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 2.535704] bone_capemgr bone_capemgr: initialized OK.
[ 2.543748] PM: bootloader does not support rtc-only!
[ 2.544785] omap_rtc 44e3e000.rtc: setting system clock to 2017-03-24
16:07:03 UTC (1490371623)
[ 2.544818] of_cfs_init
[ 2.544972] of_cfs_init: OK
[ 2.546570] bone_capemgr bone_capemgr: slot #5: BB-UART2 conflict P9.21
(#0:BB-BONE-LCD7-01)
[ 2.555181] bone_capemgr bone_capemgr: slot #5: Failed verification
[ 2.567923] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 187,
base_baud = 3000000) is a 8250
[ 2.568474] bone_capemgr bone_capemgr: slot #4: dtbo
'BB-UART1-00A0.dtbo' loaded; overlay id #0
[ 2.571869] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 188,
base_baud = 3000000) is a 8250
[ 2.573495] backlight supply power not found, using dummy regulator
[ 2.574490] backlight supply power not found, using dummy regulator
[ 2.575562] PM: Hibernation image not present or could not be loaded.
[ 2.576261] bone_capemgr bone_capemgr: slot #6: dtbo
'BB-UART4-00A0.dtbo' loaded; overlay id #2
[ 2.577407] Freeing unused kernel memory: 744K (c0ed8000 - c0f92000)
[ 2.579500] backlight supply power not found, using dummy regulator
[ 2.581521] input: gpio_keys as /devices/platform/gpio_keys/input/input1
[ 2.582102] backlight supply power not found, using dummy regulator
[ 2.587267] bone_capemgr bone_capemgr: slot #0: dtbo
'BB-BONE-LCD7-01-00A3.dtbo' loaded; overlay id #1
[ 2.662343] usb 1-1: New USB device found, idVendor=0403, idProduct=6010
[ 2.662367] usb 1-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.662377] usb 1-1: Product: Dual RS232-HS
[ 2.662386] usb 1-1: Manufacturer: FTDI
[ 2.664370] backlight supply power not found, using dummy regulator
[ 2.878379] random: systemd-udevd: uninitialized urandom read (16 bytes
read, 22 bits of entropy available)
[ 2.879153] random: systemd-udevd: uninitialized urandom read (16 bytes
read, 22 bits of entropy available)
[ 2.892765] random: udevadm: uninitialized urandom read (16 bytes read,
22 bits of entropy available)
[ 2.893232] random: udevadm: uninitialized urandom read (16 bytes read,
22 bits of entropy available)
[ 2.893410] random: udevadm: uninitialized urandom read (16 bytes read,
22 bits of entropy available)
[ 2.894521] random: udevadm: uninitialized urandom read (16 bytes read,
22 bits of entropy available)
[ 2.895175] random: udevadm: uninitialized urandom read (16 bytes read,
22 bits of entropy available)
[ 2.895729] random: udevadm: uninitialized urandom read (16 bytes read,
22 bits of entropy available)
[ 2.896336] random: udevadm: uninitialized urandom read (16 bytes read,
22 bits of entropy available)
[ 2.897000] random: udevadm: uninitialized urandom read (16 bytes read,
22 bits of entropy available)
[ 3.594651] bone_capemgr bone_capemgr: slot #5: BB-UART2 conflict P9.21
(#0:BB-BONE-LCD7-01)
[ 3.603271] bone_capemgr bone_capemgr: slot #5: Failed verification
[ 3.624814] bone_capemgr bone_capemgr: loader: failed to load slot-5
BB-UART2:00A0 (prio 0)
[ 11.312371] EXT4-fs (mmcblk1p1): INFO: recovery required on readonly
filesystem
[ 11.312397] EXT4-fs (mmcblk1p1): write access will be enabled during
recovery
[ 12.247707] EXT4-fs (mmcblk1p1): recovery complete
[ 12.252503] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.899907] systemd[1]: Failed to insert module 'kdbus': Function not
implemented
[ 12.945393] systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT
+GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 12.946388] systemd[1]: Detected architecture arm.
[ 12.962796] systemd[1]: Set hostname to <arm>.
[ 13.651981] systemd[1]: Reached target Encrypted Volumes.
[ 13.652919] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.654978] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[ 13.655492] systemd[1]: Listening on udev Control Socket.
[ 13.655764] systemd[1]: Listening on udev Kernel Socket.
[ 13.655917] systemd[1]: Reached target Swap.
[ 13.656290] systemd[1]: Listening on Journal Socket.
[ 13.657322] systemd[1]: Created slice User and Session Slice.
[ 13.658134] systemd[1]: Started Dispatch Password Requests to Console
Directory Watch.
[ 13.658586] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[ 13.658703] systemd[1]: Reached target Remote File Systems (Pre).
[ 13.658990] systemd[1]: Listening on Syslog Socket.
[ 13.659868] systemd[1]: Created slice System Slice.
[ 13.665011] systemd[1]: Starting Create list of required static device
nodes for the current kernel...
[ 13.714469] systemd[1]: Starting Load Kernel Modules...
[ 13.718363] systemd[1]: Reached target Slices.
[ 13.719549] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 13.720435] systemd[1]: Created slice system-getty.slice.
[ 13.741312] systemd[1]: Mounting /sys/kernel/debug...
[ 13.772063] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 13.811596] systemd[1]: Starting File System Check on Root Device...
[ 13.863081] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.863669] systemd[1]: Listening on /dev/initctl Compatibility Named
Pipe.
[ 13.863956] systemd[1]: Reached target Remote File Systems.
[ 13.893135] systemd[1]: Starting LSB: Set console font and keymap...
[ 13.917614] systemd[1]: Listening on Journal Audit Socket.
[ 13.972604] systemd[1]: Starting Journal Service...
[ 14.144650] systemd[1]: Mounted POSIX Message Queue File System.
[ 14.144998] systemd[1]: Mounted /sys/kernel/debug.
[ 14.158538] systemd[1]: Started Create list of required static device
nodes for the current kernel.
[ 14.178895] systemd[1]: Started Load Kernel Modules.
[ 14.188909] systemd[1]: Started LSB: Set console font and keymap.
[ 14.203165] systemd[1]: Started File System Check on Root Device.
[ 14.257214] systemd[1]: Started File System Check Daemon to report
status.
[ 14.297738] systemd[1]: Starting Apply Kernel Variables...
[ 14.327531] systemd[1]: Mounting FUSE Control File System...
[ 14.372640] systemd[1]: Mounting Configuration File System...
[ 14.482224] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 14.595916] systemd[1]: Mounted Configuration File System.
[ 14.596275] systemd[1]: Mounted FUSE Control File System.
[ 14.637067] systemd[1]: Started Apply Kernel Variables.
[ 14.672045] systemd[1]: Started Create Static Device Nodes in /dev.
[ 14.706479] systemd[1]: Starting udev Kernel Device Manager...
[ 14.728951] systemd[1]: Started Journal Service.
[ 15.099611] EXT4-fs (mmcblk1p1): re-mounted. Opts: errors=remount-ro
[ 15.622619] systemd-journald[563]: Received request to flush runtime
journal from PID 1
[ 17.913870] random: nonblocking pool is initialized
[ 20.927733] Bluetooth: Core ver 2.21
[ 20.927891] NET: Registered protocol family 31
[ 20.927901] Bluetooth: HCI device and connection manager initialized
[ 20.927929] Bluetooth: HCI socket layer initialized
[ 20.927947] Bluetooth: L2CAP socket layer initialized
[ 20.928001] Bluetooth: SCO socket layer initialized
[ 21.202017] net eth0: initializing cpsw version 1.12 (0)
[ 21.202047] net eth0: initialized cpsw ale version 1.4
[ 21.202058] net eth0: ALE Table size 1024
[ 21.341680] net eth0: phy found : id is : 0x7c0f1
[ 21.376503] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.439583] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.439611] Bluetooth: BNEP filters: protocol multicast
[ 21.439642] Bluetooth: BNEP socket layer initialized
[ 22.418973] using random self ethernet address
[ 22.419003] using random host ethernet address
[ 22.546190] usb0: HOST MAC 68:9e:19:6f:2e:13
[ 22.556602] usb0: MAC 68:9e:19:6f:2e:14
[ 23.039195] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 24.354792] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full -
flow control rx/tx
[ 24.354889] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 24.419126] 8021q: 802.1Q VLAN Support v1.8
[ 24.419206] 8021q: adding VLAN 0 to HW filter on device eth0
[ 28.168445] backlight supply power not found, using dummy regulator
[ 28.228545] input: ti-tsc as
/devices/platform/ocp/44e0d000.tscadc/TI-am335x-tsc/input/input2
[ 28.266013] backlight supply power not found, using dummy regulator
[ 28.300386] backlight supply power not found, using dummy regulator
[ 29.636967] backlight supply power not found, using dummy regulator
[ 29.809233] backlight supply power not found, using dummy regulator
[ 29.899633] usbcore: registered new interface driver usbserial
[ 29.899738] usbcore: registered new interface driver usbserial_generic
[ 29.899822] usbserial: USB Serial support registered for generic
[ 29.953542] usbcore: registered new interface driver ftdi_sio
[ 29.953663] usbserial: USB Serial support registered for FTDI USB Serial
Device
[ 29.984992] pinctrl-single 44e10800.pinmux: pin 44e108a0.0 already
requested by 0-0070; cannot claim for panel
[ 29.995303] pinctrl-single 44e10800.pinmux: pin-40 (panel) status -22
[ 30.001873] pinctrl-single 44e10800.pinmux: could not request pin 40
(44e108a0.0) from group pinmux_bb_lcd_lcd_pins on device pinctrl-single
[ 30.014693] panel panel: Error applying setting, reverse things back
[ 30.034841] ftdi_sio 1-1:1.0: FTDI USB Serial Device converter detected
[ 30.035183] usb 1-1: Detected FT2232H
[ 30.054114] usb 1-1: FTDI USB Serial Device converter now attached to
ttyUSB0
[ 30.054584] backlight supply power not found, using dummy regulator
[ 30.055403] backlight supply power not found, using dummy regulator
[ 30.055851] ftdi_sio 1-1:1.1: FTDI USB Serial Device converter detected
[ 30.056121] usb 1-1: Detected FT2232H
[ 30.080913] usb 1-1: FTDI USB Serial Device converter now attached to
ttyUSB1
[ 30.081382] backlight supply power not found, using dummy regulator
[ 30.093180] backlight supply power not found, using dummy regulator
[ 30.111772] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 30.112211] backlight supply power not found, using dummy regulator
[ 30.206981] backlight supply power not found, using dummy regulator
[ 30.636706] pinctrl-single 44e10800.pinmux: pin 44e108a0.0 already
requested by 0-0070; cannot claim for panel
[ 30.646924] pinctrl-single 44e10800.pinmux: pin-40 (panel) status -22
[ 30.653460] pinctrl-single 44e10800.pinmux: could not request pin 40
(44e108a0.0) from group pinmux_bb_lcd_lcd_pins on device pinctrl-single
[ 30.666238] panel panel: Error applying setting, reverse things back
[ 31.792384] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 31.992188] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 32.175117] panel panel: pins are not configured
[ 32.457095] tda998x 0-0070: found TDA19988
[ 32.463278] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops
[tda998x])
[ 32.463315] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 32.463323] [drm] No driver support for vblank timestamp query.
[ 32.754069] Console: switching to colour frame buffer device 100x30
[ 32.756880] tilcdc 4830e000.lcdc: fb0: frame buffer device
[ 32.756937] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0
[ 36.495483] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping
ok
I do not understand what's happening. If you have any idea It would be very
helpful :)
Thanks !
PM
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/39234611-f753-44e0-8213-bcd415976a2f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
