Hi, I was having this issue on a windows 10 machine. When I went to install the software that was on the BBB the windows popup was yellow asking if I wanted to install from an unknown publisher. I tried the suggestions listed here and they didn't work. I then went to http://beagleboard.org/static/beaglebone/latest/README.htm and downloaded the driver from there. When I ran that it listed it was from a verified publisher and the installation worked properly. At that point I was also able to access the BBB through the ip address. Hope this works for everybody else finding their way to this page.
On Wednesday, August 12, 2015 at 8:13:13 PM UTC-7, mscleavite wrote: > > I have just upgraded to Windows 10 on a machine that I have not previously > connected my BBB to. I had success on other windows 8 machines as well as > SSHing using Putty. I have spent SOME time searching forums and not > finding much at all on Windows 10. During the install of the Bone_D64.exe, > the driver the status returned on all the drivers is "Install Failed". Let > the flaming begin..... Or hopefully there is someone out there that has > encountered and concurred this. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/cb56a64f-33d2-41bd-8b46-435aae1c4eeb%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
