Dennis Lee Bieber <[email protected]> wrote: > On Fri, 24 Mar 2017 20:56:27 +0000, Chris Green > <[email protected]> declaimed the following: > > > > >What's the most straightforward way of doing this? It's a headless > >system but (when I'm at the place where it's running) I have > >reasonably good/fast access to the internet from the LAN where it is > >running. > > > > Is it running off the eMMC, or off an SD card? > > In either case, I'd probably recommend creating a bootable Jessie > image > on SD card... > > Boot the card -- copy your custom scripts from eMMC to equivalent > location on the SD card (you do have them in a nice isolated location, > don't you?). Reboot to confirm they are working. Then... if you don't want > to run off the SD card, convert the card to a flasher and flash the > contents back to the eMMC -- remove SD card, reboot, test. > > Suggested image, and flasher instructions: > http://beagleboard.org/latest-images > OK, thanks, that sounds pretty straightforward. Yes, my scripts are in a well defined (and backed up off board) place.
-- Chris Green ยท -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/27ikqd-a63.ln1%40esprimo.zbmc.eu. For more options, visit https://groups.google.com/d/optout.
