Hello All, I am trying to get CAN working on a Beaglebone Black running the following kernel:
Linux beaglebone 4.4.54-ti-r93 #1 SMP Fri Mar 17 13:08:22 UTC 2017 armv7l GNU/Linux I am attempting to use the CAN1 interface on the BeageBone as I have done previously on other distriubutions, however when I follow the instructions posted here: https://github.com/RobertCNelson/bb.org-overlays I get an error. For example, if I try the following: root@beaglebone:/home/debian# echo 'BB-UART1' > /sys/devices/platform/bone_capemgr/slots bash: echo: write error: File exists Dmesg output: [ 40.829790] bone-pinmux-helper: probe of ocp:P9_31_pinmux failed with error -22 [ 40.859306] gpio-of-helper ocp:cape-universal: Allocated GPIO id=0 [ 40.859510] gpio-of-helper ocp:cape-universal: Allocated GPIO id=1 [ 40.859679] gpio-of-helper ocp:cape-universal: Allocated GPIO id=2 [ 40.859851] gpio-of-helper ocp:cape-universal: Allocated GPIO id=3 [ 40.860015] gpio-of-helper ocp:cape-universal: Allocated GPIO id=4 [ 40.860176] gpio-of-helper ocp:cape-universal: Allocated GPIO id=5 [ 40.860351] gpio-of-helper ocp:cape-universal: Allocated GPIO id=6 [ 40.860513] gpio-of-helper ocp:cape-universal: Allocated GPIO id=7 [ 40.860683] gpio-of-helper ocp:cape-universal: Allocated GPIO id=8 [ 40.860852] gpio-of-helper ocp:cape-universal: Allocated GPIO id=9 [ 40.861016] gpio-of-helper ocp:cape-universal: Allocated GPIO id=10 [ 40.861194] gpio-of-helper ocp:cape-universal: Allocated GPIO id=11 [ 40.861365] gpio-of-helper ocp:cape-universal: Allocated GPIO id=12 [ 40.861534] gpio-of-helper ocp:cape-universal: Allocated GPIO id=13 [ 40.861705] gpio-of-helper ocp:cape-universal: Allocated GPIO id=14 [ 40.861874] gpio-of-helper ocp:cape-universal: Allocated GPIO id=15 [ 40.875457] gpio-of-helper ocp:cape-universal: Allocated GPIO id=16 [ 40.875733] gpio-of-helper ocp:cape-universal: Allocated GPIO id=17 [ 40.875912] gpio-of-helper ocp:cape-universal: Allocated GPIO id=18 [ 40.876095] gpio-of-helper ocp:cape-universal: Allocated GPIO id=19 [ 40.876259] gpio-of-helper ocp:cape-universal: Allocated GPIO id=20 [ 40.876418] gpio-of-helper ocp:cape-universal: Allocated GPIO id=21 [ 40.876580] gpio-of-helper ocp:cape-universal: Allocated GPIO id=22 [ 40.876735] gpio-of-helper ocp:cape-universal: Allocated GPIO id=23 [ 40.876889] gpio-of-helper ocp:cape-universal: Allocated GPIO id=24 [ 40.881135] gpio-of-helper ocp:cape-universal: Allocated GPIO id=25 [ 40.881355] gpio-of-helper ocp:cape-universal: Allocated GPIO id=26 [ 40.881558] gpio-of-helper ocp:cape-universal: Allocated GPIO id=27 [ 40.881716] gpio-of-helper ocp:cape-universal: Allocated GPIO id=28 [ 40.881877] gpio-of-helper ocp:cape-universal: Allocated GPIO id=29 [ 40.886404] gpio-of-helper ocp:cape-universal: Allocated GPIO id=30 [ 40.886687] gpio-of-helper ocp:cape-universal: Allocated GPIO id=31 [ 40.886865] gpio-of-helper ocp:cape-universal: Allocated GPIO id=32 [ 40.887041] gpio-of-helper ocp:cape-universal: Allocated GPIO id=33 [ 40.887201] gpio-of-helper ocp:cape-universal: Allocated GPIO id=34 [ 40.887366] gpio-of-helper ocp:cape-universal: Allocated GPIO id=35 [ 40.887526] gpio-of-helper ocp:cape-universal: Allocated GPIO id=36 [ 40.887538] gpio-of-helper ocp:cape-universal: ready [ 40.898497] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 199, base_baud = 3000000) is a 8250 [ 40.908411] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 200, base_baud = 3000000) is a 8250 [ 40.918518] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 201, base_baud = 3000000) is a 8250 [ 40.930524] eqep 48300180.eqep: ver. 1.0 [ 40.940161] eqep 48302180.eqep: ver. 1.0 [ 40.957039] eqep 48304180.eqep: ver. 1.0 [ 40.975138] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz [ 41.016139] bone_capemgr bone_capemgr: slot #4: dtbo 'cape-universaln-00A0.dtbo' loaded; overlay id #0 [ 41.020746] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok [ 42.912836] CAN device driver interface [ 43.056608] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=210) [ 43.087789] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=211) [ 194.362266] bone_capemgr bone_capemgr: part_number 'BB-UART1', version 'N/A' [ 194.362348] bone_capemgr bone_capemgr: slot #5: override [ 194.362391] bone_capemgr bone_capemgr: Using override eeprom data at slot 5 [ 194.362439] bone_capemgr bone_capemgr: slot #5: 'Override Board Name,00A0,Override Manuf,BB-UART1' [ 194.375726] bone_capemgr bone_capemgr: slot #5: BB-UART1 conflict P9.24 (#4:cape-universaln) [ 194.384469] bone_capemgr bone_capemgr: slot #5: Failed verification I have no idea how to move forward and have been stuck here for a few days, does anyone have any suggestions? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ef95385f-5bad-42c6-a56a-963f163f9776%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
