Okay I found the dtsi file in /opt/source/dtb-4.9-ti/src/arm/ :) Do I have to recompile it after editing the file ?
If Yes, what command should i type ? Thanks :) Le lundi 27 mars 2017 18:04:04 UTC+2, PM a écrit : > > Thanks for the info. > > I tried to find the corresponding dtb to modify but no success :( > > I can't find any am335x-bone-common.dtb. Do you know where should I look ? > > Regards, > > PM > > Le lundi 27 mars 2017 15:14:37 UTC+2, Jason Kridner a écrit : >> >> >> >> On Mar 27, 2017, at 8:47 AM, Gerald Coley <ger...@beagleboard.org> wrote: >> >> Reset pin goes to the reset line and the power button goes to the PMIC. >> PMIC pins and reset lines are not controlled via the DTS file >> >> >> The interrupt into software for the power button is dts controlled: >> >> https://patchwork.kernel.org/patch/9389243/ >> >> You can eliminate the software shutdown, but the hardware will still do a >> power down if the button is held for more than about 10-12 seconds. >> >> >> >> >> >> On Mon, Mar 27, 2017 at 5:02 AM, PM <paskal.marec...@gmail.com> wrote: >> >>> Hello everybody, >>> >>> I am trying to disable my reset & poweroff button from my LCD7 cape. >>> I saw on the schematic diagram that these buttons are directly connected >>> to SYS_RESET & PWR_BUT. >>> >>> I would like to know if it is possible to disable these buttons by >>> editing any 'dts' or 'dtso' file ? >>> >>> Thank you very much. >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to beagleboard+unsubscr...@googlegroups.com. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/37da3ff7-94d4-4305-ad02-49b8c000655f%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/beagleboard/37da3ff7-94d4-4305-ad02-49b8c000655f%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> >> >> -- >> Gerald >> >> ger...@beagleboard.org >> http://beagleboard.org/ >> gcol...@emprodesign.com >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to beagleboard+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/CAHK_S%2BccvBKiyy5-AXM7pU5eSP4S09%2B1XVH2kQp5P-zk-3PVzQ%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/beagleboard/CAHK_S%2BccvBKiyy5-AXM7pU5eSP4S09%2B1XVH2kQp5P-zk-3PVzQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/99aea23d-37ac-4aaa-a5ca-984b6ec14b9b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
