Hi everyone, I'm building a custom piece of mechatronics as part of my day job. We have a custom interface cape laid out (it doesn't have an eeprom) and I've mapped out the 16 lines we need to go back to the BBB. I've written a custom device tree for these lines which compiles with dtc fine, no errors. I've configured uEnv.txt to not load any other overlays, everything we don't need is disabled. As a result of the universal-cape not being loaded, I can't use config-pin to query if my pins have been setup correctly through my device tree.
Should I ditch my device tree based setup, and use the universal-cape along with a script to configure my pimuxing? Would this approach be easier to debug/verify? Thanks in advance, Hugh -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e564a1f5-5efd-4832-8365-96817dede943%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
