On Thursday, April 6, 2017 at 10:51:41 AM UTC-4, [email protected] wrote: > > Hi everybody, > I am working on a solar water heater project which will be presented > at the Maker Faire Europe in Rome, Italy, in October 2017. > I am using BBB from Labview with Linx 3.0. > My problem is this: from Linx, it is only possible to control the duty > cycle of > the PWM outputs, not the frequency, which is fixed. But I need to use > a PWM with the frequency 50 Hz and another PWM with the frequency 2000 Hz > at the same time, and I cannot do that. > How can this be solved? The ideal solution would be to have a patched > PWM VI in Labview Linx which controls both frequency and duty cycle. > Can anybody help me? >
I asked the developers at NI and they pointed me to the LVMakerHub forums: https://www.labviewmakerhub.com/forums/index.php Can you ask over there and come back here with any answer you get? If you don't get an answer, please post here with the link to your post on the other forum and I'll follow-up with NI directly. This just seems like a pretty fundamental feature to support. > Thanks! > > Antonio > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/419bcb23-e19c-44cc-848d-546d6114389c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
