how did you get it fixed? On Thursday, 31 October 2013 04:03:08 UTC+2, Sheldon Will wrote: > > Is that an exact number, or are you just being a dick? > > It's fixed now... not by your wiki basics. > > Peace. > > On Wednesday, October 30, 2013 6:44:44 PM UTC-7, Gerald wrote: >> >> Well, we have used that procedure 82,000 times. So if you did it exactly >> as I wrote it and it didn't work, then you have an issue that you can't fix. >> >> Gerald >> >> >> >> On Wed, Oct 30, 2013 at 8:06 PM, <[email protected]> wrote: >> >>> Been there, done that... Thanks anyways for the suggestion. >>> >>> >>> On Wednesday, October 30, 2013 6:00:39 PM UTC-7, Gerald wrote: >>> >>>> My suggestion, And this is just me. GO back to the factory mode. Follow >>>> the instructions on the Wiki. Make sure all that still works. >>>> Then continue down the path you are going. This way you know whether or >>>> not >>>> the HW has any issues. >>>> >>>> Gerald >>>> >>>> >>>> >>>> On Wed, Oct 30, 2013 at 7:48 PM, <[email protected]> wrote: >>>> >>>>> Cool, no way near that! >>>>> >>>>> Okay, so I think I have narrowed down what just happened here! >>>>> >>>>> I fdisk'd and formatted, well thought I did, the sd card. But now I >>>>> have come to realize depending on if a sd card is inserted at boot or >>>>> not, >>>>> changes the way mmcblk*'s are allocated. so my emmc actually got >>>>> re-partitioned. Yeah, I should have double checked things, but why is it >>>>> re-arranging like this and not just standardized to the emmc always >>>>> specifically being on a certain mmcblk? >>>>> >>>>> So now, nothing will work. I get so far with ANY distro, be it emmc >>>>> flasher or an image made to run off of SD, bam, blinking led's. dmesg >>>>> reveals ifile errors. I am stuck in a read-only rootfs and I cannot do >>>>> anything to fix the emmc. >>>>> >>>>> Hope some of this makes sense. >>>>> >>>>> >>>>> >>>>> On Wednesday, October 30, 2013 5:35:48 PM UTC-7, Gerald wrote: >>>>> >>>>>> 3,000 times per bit. >>>>>> >>>>>> Gerald >>>>>> >>>>>> >>>>>> >>>>>> On Wed, Oct 30, 2013 at 7:30 PM, <[email protected]> wrote: >>>>>> >>>>>>> Yes. >>>>>>> >>>>>>> Can this question be answered: How many times can the emmc be >>>>>>> reflashed?? >>>>>>> >>>>>>> Thanks, >>>>>>> Sheldon. >>>>>>> >>>>>>> >>>>>>> On Wednesday, October 30, 2013 2:49:40 PM UTC-7, >>>>>>> [email protected] wrote: >>>>>>>> >>>>>>>> Heya, I have been experimenting with different distro's on the >>>>>>>> BBB, trying to find the one that works for what I want. Gotta admit >>>>>>>> this >>>>>>>> thing is touchy and cumbersome, sometimes boot's, sometimes doesn't. >>>>>>>> Now >>>>>>>> upon trying to flash the emmc I get four user led's blinking >>>>>>>> synchronously! The only doc's I can find on this state that I have >>>>>>>> used up >>>>>>>> my limit flashing the emmc. Please tell me this isn't true?!?! If >>>>>>>> so, >>>>>>>> this would be absurd to me as I have only re-flashed it under ten >>>>>>>> times. >>>>>>>> >>>>>>>> Can someone please advise if this is the case, or is there >>>>>>>> something else wrong? I don't have a serial connection and don't want >>>>>>>> to >>>>>>>> waste any money on getting one to see the error code if this is in >>>>>>>> fact the >>>>>>>> case! >>>>>>>> >>>>>>>> Any help would be appreciated! >>>>>>>> Thanks, >>>>>>>> Sheldon. >>>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>> >>>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >>
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f87dd153-1273-4ebb-a4dd-c24e181756e7%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
